Step One: Power up this camera with the power adapter and connect it to your router with a network cable.

Step Two: Download the AView App on your phone, register an account and log in, and click to scan the code to add a camera.  (How to add your camera in the AView app)

Step Three: If the camera is added successfully, click the setting button of the camera to find the WIFI setting.

Here shows the list of WIFI networks currently searched by the camera.

Click your WIFI network and enter the WIFI password. Then pull down to refresh the list of WIFI network. If the WIFI connection is successful, there will be a connection symbol as shown in the picture above.

And then you can unplug the network cable at this time.

If you find any prompt that the device is not connected to the network when scanning the code to add, it means that the camera cannot automatically obtain the correct IP address from your router. In this case, you need to install the IPCmanager software on your computer and manually set the IP address for the camera, and then scan the code and add it finally.

You can download the IPCmanager from:

https://hviewsmart.com/pages/download-center

If you experience any problems, please contact us for further support.

support@hviewsmart.com