1. The camera need to mounted with SD card.Enter the camera’s web interface,check the SD card status was normal.
2. Check the FTP server address,Port,User name and password.
Then set the FTP of camera,and click the Test FTP button,When the 'Test passed' pops up in the lower right corner, the FTP setup is successful.
3. Timing Recording:Enable the record function,the Destination need to be SD,mean the recording save in the camera’s SD card.
Set the FTP upload time,if you want to set some time upload the recording and some time don’t,you can set the Schedule to upload.
4. Detection recording:Enable the motion detection or other detection function,and let it run in the time schedule.
Enable the Record and FTP function in the detection action.it can save snapshots on the FTP too.