First, follow these instructions to define the preset locations of your camera

1. Open the camera in IE Browser

2. You should now see the PTZ control panel in the upper right-hand corner of the H.VIEW system screen.

3. Use the PTZ controls to adjust the view of that camera to the first preset location that you would like to define.

4. When the view is in the right position, Select 001 Preset Set1, then Preset Naming.

5.  The preset naming screen will open as seen below. Then select the position of the preset that you want to use. Preset 1 -128.(When you complete, the status of preset is “Set”)

6. When you complete one preset, click  to preview the position you set.

7. Repeat steps 3 - 6 for each PTZ camera location that you want to define for your system.

Second, Add the presets to Cruises (This function can set the time camera stay on each presets )

 8. After adding the presets to Cruises, click  to preview all cruises you added.

9. Done.

We hope that these instructions help guide you through the process of setting and using PTZ preset locations with H.VIEW