How to change the NVR`s output resolution in the web interface?

1. Download the software Guard Station on your computer and connect the computer to the same network as the NVR.

2. Log in the Guard Station. The user name is admin, password is 123456.

3.Go to the Device Management.

4. Find the NVR`s IP address under the Encoding Device→Online Device. The NVR`s model normally starts with the letter ‘NVR’.

Note: If there is no device under the Online Device, double check if the computer and the NVR are connected to the same network.

5. Enter the NVR`s IP address in a browser, then fill in the NVR`s login user name and password to access the web interface.

6. Go to the Setup→System→Preview to change the NVR`s output resolution.

English Instruction